From here you can mix and match the individual loops (parts). 

The top LCD shows the current kit or simply "---USER---" if you´ve modified (loaded another loop) the kit. It has no other functionality.

You have 4 LCD´s that represent the current (loaded) loop.  From there you can select different loops or let Synferno choose new ones by clicking on the "R" buttons. (Randomize).

The "R" buttons have different functions depending on what key you press at the same time:

- NO KEY: chooses random loop from the part´s loop list.

- SHIFT: randomizes parameters in the FX and EDIT page, as well as choosing a random FX preset.

- ALT: chooses a random loop for all four parts at once.

- SHIFT + ALT: chooses a random loop for all parts + randomizes FX and EDIT page values (random FX preset).

NOTE: When you press SHIFT and ALT on the first "R" button on the mix page (BASS section) that also alters the sequencer state (on/off) + chooses a random sequencer preset for ALL parts.

The SOLO buttons can be used to solo parts. Clicking any SOLO button with COMMAND/ALT or SHIFT will deactivate any active solo.

For almost all controls you can press ALT and adjust the value for all parts at once. (It´s always stated in KONTAKT´s information window). COMMAND/CONTROL will reset values. SHIFT is for fine-tuning.

The SPACE knobs set the amount of convolution reverb for the selected part. (The "SPACE" toggle button must be enabled in the FX page).

The FX buttons can be used to enable or disable FX sections for the parts. The SEQ buttons will enable/disable the per-part sequencer.

The STEP FILTER is a tempo-synced bandpass filter that randomly changes it´s cutoff. The AMOUNT controls the strength of the cutoff sweeps. The STEP GATE is a classical volume "trancegate".  In the middle are on/off toggle buttons for the various effect sections. To the right is a preset menu with 32 presets and a "R" button that chooses one randomly.

The SPACE REVERB comes with 60 impulse responses that you can choose via the dropdown menu. This convolution reverb is available for each part. (Each with a different IR if wanted). CPU = BAD ;-)

Perhaps the most interesting thing in SYNFERNO. Each part has a 2 x 32 step sequencer that let´s you not only control the sample offset per part but also the loop offset. So basically it loads 32 loops per part into the RAM and then you can offset which one to play. (Really interesting results).

Furthermore, each part has 32 presets (together with the famous "R" button), a rate control (1/2 , 1/4,  1/8 , 1/16), start step and end step offset knobs + a SLICE and a GATE button:

- GATE button: If the current step in the first (sample offset) sequencer is 0 it won´t play the loop at this moment. (Required for some presets.)

- SLICE button: Let´s you play the first 24 slices on the keyboard of the selected loop chromatically. ("AKAI-Style"). It will then use the default pitch, that you can still change using the SEMI knobs on the mix page.

• 350 kits | 3 Gb
• Full version of Kontakt 5.8.1 (or higher) required

This product is downloaded using Pulse